Commercial floor sanding in London typically costs £18 to £35 per square metre plus VAT. That covers sanding back to bare timber and three coats of lacquer or oil. Gap filling adds around £12 to £18 per m², and a coloured stain adds £5 to £8 per m². Use the calculator below for a guide price on your floor, then book a free site survey for a fixed written quote.
Answer five quick questions for a guide price. It takes about a minute, and nothing is sent to us unless you ask for a quote.
A guide price for sanding and three coats of finish, plus VAT. Your fixed price comes in writing after a free site survey, with no hidden extras.
Book a Free Site Survey Call 0800 917 7770Guide prices for sanding and three coats of finish, plus VAT. They assume a floor in average, worn condition. A floor in good condition can come in lower, and a badly damaged one higher.
| Floor type | Guide price (plus VAT) |
|---|---|
| Pine or softwood boards | £18 to £26 per m² |
| Oak or hardwood boards | £20 to £30 per m² |
| Parquet or woodblock | £24 to £35 per m² |
| Engineered wood | £20 to £28 per m² |
| Sports or school hall floor | £18 to £28 per m² |
| Extra | Guide price (plus VAT) |
|---|---|
| Gap filling with timber slivers | add £12 to £18 per m² |
| Hardwax oil instead of lacquer | add £2 to £4 per m² |
| Stain or colour change | add £5 to £8 per m² |
| Court and game lines | priced on the survey |
| Board or block repairs | priced on the survey |
Five real world examples, worked out with the same figures the calculator uses. All prices are plus VAT.
20 m² of oak boards, worn, clear lacquer. Guide price: £550 to £830 plus VAT. Time on site: about 2 days.
60 m² of Victorian pine boards, poor condition, gap filling, hardwax oil. Guide price: £2,140 to £3,190 plus VAT. Time on site: about 4 days.
150 m² of engineered oak, worn, clear lacquer. Guide price: £3,300 to £4,620 plus VAT. Time on site: about 4 days.
80 m² of herringbone parquet, worn, stained to a darker colour. Guide price: £2,510 to £3,720 plus VAT. Time on site: about 4 days.
300 m² hall floor, worn, sports lacquer (court lines priced separately). Guide price: £5,940 to £9,240 plus VAT. Time on site: about 5 days.
Larger floors cost less per square metre, because setting up, edging and finishing take a similar amount of time whatever the size. Floors under 25 m² are priced as a minimum visit.
Pine boards sand quickly. Oak takes longer, and parquet takes longest of all, because the blocks run in different directions and need careful sanding across the grain. Engineered floors have a thin top layer, so we check how much wear layer is left before we quote.
Old paint, glue, deep scratches and black water stains all need extra passes with the sander. A floor that has only lost its shine needs far less work than one that has been neglected for years.
Clear lacquer is the hardest wearing and the most popular for offices and schools. Hardwax oil gives a more natural look and is easy to patch repair. A stain or colour change needs an extra stage and more drying time.
Gaps between old boards are filled with slivers of real timber glued and planed flush, which takes time but lasts. Loose, broken or missing boards and blocks are replaced before sanding.
Upper floors without a goods lift, loading bay bookings and central London parking all affect how long a job takes. Most of our commercial work is done in the evening, overnight or at weekends so your building keeps running, and we build all of this into your written quote.
Almost always. A solid wood floor can be sanded many times over its life, and sanding and refinishing usually costs a fraction of taking it up and fitting a new one. There is no skip, no waste and far less time out of use. Replacement only makes sense when the timber is rotten, has no wear layer left or has been badly damaged by water.
Sanding and sealing pine or softwood floorboards in London typically costs £18 to £26 per m² plus VAT. If the boards have gaps, filling them with timber slivers adds around £12 to £18 per m². A 20 m² room is priced as a minimum visit of 25 m².
Most commercial floors in London come in between £18 and £35 per m² plus VAT for sanding and three coats of finish. Pine boards sit at the lower end, and parquet and badly damaged floors at the higher end.
Parquet and woodblock floors typically cost £24 to £35 per m² plus VAT to sand and refinish, because the blocks need sanding in several directions to get a flat, even finish.
Yes. After a free site survey we send a fixed, written quotation that covers everything we have agreed, with no hidden extras.
A single room is usually finished in one or two days. An office floor of 150 m² takes around four days, and a large school hall around five. We often work overnight or at weekends so the floor is ready when you need it.
No. All the prices on this page and in the calculator are plus VAT at the standard rate.
The calculator gives you a guide. For a firm price, book a free site survey and we will send you a fixed written quote. Call 0800 917 7770 or send us a message.